Shutter Measurement and Installation
Measure & Install Your Shutters with Confidence
Simple step-by-step videos and instructions to help you get it right the first time.
Measure Once. Install with Confidence.
Getting the right fit matters. That’s why we’ve created simple, step-by-step guides to walk you through both measuring and installation. Whether you’re working with Bahama shutters or traditional styles, you’ll have clear instructions that help you get it right the first time.
Bahama Shutter Guides
Start with measurement, then move through installation using guides below.
Image 1: Measuring Windows for Bahama Shutters
Measuring for Bahama Shutters
Bahama Shutters can be installed in any area where shade or moderate privacy is needed. They can be mounted on windows, porches or gazebos.
Measure Overall Height
To measure the height, Measure from point A (on Image 1) to point B.
Measure Overall Width
To measure the width, Measure from point C (on Image 1) to point D.
Please note whether you would like vertical stiles and the number you want.
*Vertical Stiles are required on Bahama Shutters over 50” in width.
Want a visual guide? The video below walks you through each step.
Steps to Measure for Bahama Shutters
Here Adam gives measuring info on capri, mid, or full-length bahama shutter.
How to Install Bahama Shutters
If you have a drill and a level, this is for you. (Okay, maybe you’ll need a ladder too.)
Traditional Shutter Guides
Start with measurement, then move through installation using guides below.
Image 2: Measuring Traditional Windows
Measuring for Traditional Shutters
Measurements should be taken from the inside of the window casing. This is the area that historically functional shutters would cover.
Measure Overall Height
To measure the height, Measure from point A (on Image 2) to point B.
Measure Overall Width
To measure the width, Measure from point C (on Image 2) to point D.
- This is the measurement for a PAIR of shutters. Divide by 2, this is the measurement for each shutter panel.*
- If you have a bank of 2 or 3 windows. Measure one of the end windows and use those measurements to determine height and width for a single panel on each side of the bank.**
*If you are ordering functional shutters, because there could be variation, measure three locations – once near each side and once in the center – and use the smallest of the three measurements. Do this for both the height and the width. If you are planning to actually close your shutters, we recommend you deduct 1/4” from your smallest measurement to ensure clearance.
**If you have a bank of two windows, and are planning on closing the shutters, you will have to have the panels bi-folded to work. This requires additional hardware.
Want a visual guide? The video below walks you through each step.
Steps to Measure for Traditional Shutters
Here Adam gives directions on measuring your shutters for the perfect fit on your home.
Measuring for Arched Shutters
Image 3: Measuring Arched Windows
Measurements should be taken from the inside of the window casing. This is the area that historically functional shutters would cover.
Measure Overall Height
To measure the height, Measure from point A (on Image 3) to point B.
Measure the Breakline
To measure where the arch begins, Measure from point E (on Image 3) to point F.
Measure Overall Width
To measure the width, Measure from point C (on Image 3) to point D.
- This is the measurement for a PAIR of shutters. Divide by 2, this is the measurement for each shutter panel.*
- If you have a bank of 2 or 3 windows. Measure one of the end windows and use those measurements to determine height and width for a single panel on each side of the bank.**
*If you are ordering functional shutters, because there could be variation, measure three locations – once near each side and once in the center – and use the smallest of the three measurements. Do this for both the height and the width. If you are planning to actually close your shutters, we recommend you deduct 1/4” from your smallest measurement to ensure clearance.
**If you have a bank of two windows, and are planning on closing the shutters, you will have to have the panels bi-folded to work. This requires additional hardware.
How to Install Traditional Shutters
All you need is a measuring tape, a marker, a drill, and some hardware to hang the perfect shutter.